About this product
Combine this product with matching add-ons and see your savings before adding the bundle.
Select the allowed products for each bundle step.
Fixed base
Step 2
Step 3
Step 4
Step 5
Product information
See benefits, product information, specs and reviews in one place.
Is your petrol engine running less smoothly, losing power, or no longer performing as it should? Contamination in the fuel, intake, and exhaust system is often the cause. Think of dirty injectors, a contaminated EGR valve, carbon build-up, or a catalytic converter or GPF that is not working efficiently.
Lindemann Total Care Petrol is designed to thoroughly clean the complete petrol system from the inside. Its powerful formula removes deposits from essential components such as the injectors, EGR valve, catalytic converter, GPF, intake system, and fuel system. This helps restore smoother performance, cleaner combustion, and better efficiency.
Lindemann Total Care Petrol is commonly used for:
When contamination is the root cause of these problems, a deep internal cleaning treatment can make a noticeable difference in performance, response, and fuel efficiency.
The active cleaning agents in Lindemann Total Care Petrol clean the fuel, intake, and exhaust system while the engine is running. The formula helps remove carbon deposits, dirt, and fuel residues from key components, allowing the engine to burn fuel more cleanly and efficiently.
Cleaner combustion helps improve engine response, reduce unnecessary contamination, and support smoother operation. For best results, add the full 1L can to the fuel tank and drive the vehicle shortly afterwards so the product can circulate properly through the system.
Lindemann Total Care Petrol is suitable for older and modern petrol engines, including hybrid vehicles. It can be used in passenger cars, vans, motorcycles, and scooters when the correct dosage is followed.
For cars, use 1L on a minimum of 20 litres and a maximum of 80 litres of petrol. After adding the product, drive for at least 20 minutes with varying engine speeds. Please note: this product is not suitable for 2-stroke engines.
Dirty injectors, a contaminated EGR valve, or a poorly functioning catalytic converter can quickly lead to higher fuel consumption, reduced performance, or costly repairs. Treating contamination early helps keep the petrol system cleaner and more reliable.
Lindemann Total Care Petrol is suitable for both solving existing contamination-related issues and preventative maintenance.
| Specification | Value |
|---|---|
| SKU | 94497, tcp-2, tcp-6 |
| Barcode | 5708331944974, 8720938173493, 8720938173882 |
| Volume | 1 Liter |
| Dosage | 1L treats up to 80L of diesel |
A quick impression of application, expected results and ease of use before you read further.
Usage
FAQ
In general, most additives on the additive market are fairly similar. The raw materials are the same in most products. The difference, however, lies in the ratio between the active chemical ingredients and the base ingredients such as oil and white petroleum.
The proportion of active ingredients in Lindemann additives is significantly higher than in most competing products. This results in a longer-lasting and more effective performance.
In addition, several specific Lindemann products have extra distinguishing properties.
Lindemann Total Care Petrol is suitable for up to 80 litres of petrol. We recommend using 1 litre of Total Care Petrol with at least 20 litres of petrol. We also advise refuelling after adding the product so it mixes properly with the fuel. If the tank is still almost full, that is not a problem; adding a few litres is enough to help it mix properly.
After adding the product, we recommend driving on the motorway for at least 20 minutes with varying increased engine speed. The longer the drive, the better. Dirt comes loose more effectively once the engine is up to temperature.
The honest answer is: no, not always. It depends on the cause of the problem. An additive can only help if contamination is the cause. Mechanical damage, for example, cannot logically be repaired with an additive. One thing is certain: the additive will still do its job.
If the problem is not solved, the car will at least have received a thorough internal cleaning. Are you unsure about the chance of success? Feel free to contact us, for example via WhatsApp.
Yes, it can be used for this, but please pay attention to the dosage. 100 ml of Total Care Petrol should be used with at least 2 litres of petrol.
Please note: it is not suitable for 2-stroke engines.
